ANC-100e and ANC-120e Ethernet and USB to DH+ Converter Ignition SCADA to SLC5/04 or PLC5 on Data Highway Plus network This document provides information to configure Ignition HMI software running in a computer connected via Ethernet Network with an...
More
ANC-100e and ANC-120e Ethernet and USB to DH+ Converter Ignition SCADA to SLC5/04 or PLC5 on Data Highway Plus network This document provides information to configure Ignition HMI software running in a computer connected via Ethernet Network with an ANC-100e or USB using a ANC-120e to communicate with a SLC5/04 or PLC5 on a Data Highway Plus network. Ignition software from Inductive Automation ® is a powerful industrial software platform built for SCADA, MES and IIoT applications. Visit https://inductiveautomation.com for more information about Ignition software Ignition by Inductive Automation is a trademark of Inductive Automation, LLC. Note: Before proceeding, make sure ✓ ANC-120e Driver is installed (Only if using ANC-120e) ✓ Network Adapter is correctly configured to access ANC-120e or ANC-100e ✓ ANC-120e is connected to the computer and DH+ network or ANC-100e is connected to the same Ethernet network or directly to your computer, and to the DH+ network. For this example: ANC-100
Less