WORK SHEET AND PINNING CHART FOR SMALL FORMAT INTERCHANGEABLE CORE CYLINDERS
Job: ___________________________________ Cylinder Identification: __________________
Sheet ______ Of__________________________________ Date: ____/_____/_______
By Whom:...
More
WORK SHEET AND PINNING CHART FOR SMALL FORMAT INTERCHANGEABLE CORE CYLINDERS
Job: ___________________________________ Cylinder Identification: __________________
Sheet ______ Of__________________________________ Date: ____/_____/_______
By Whom: ______________________________
Provided by Professional Lock and Safe www.
prolocknorcal.
com
A
1 2 3 4 5 6 7
1.
Write GMK bitting
2.
Write MK Bitting
3.
Write SMK Bitting
4.
Write SMK Bitting
5.
Write CK Bitting
6.
Write Bottom Pin
7.
Write Master Pin
8.
Write Master Pin
9.
Write Master Pin
Record Bottom And Master Pins in D Below
B
1.
Write CONTROL key bitting
2.
Add (+) 10 to Control Key bitting 10 10 10 10 10 10 10
3.
This is your CONTROL NUMBER
4.
Add A6
through A9
, write here
5.
SUBTRACT B4
from B3
.
These are your
CONTROL PINS
Record Control Pins in D Below
C
1.
Total Allowable Pins 23 23 23 23 23 23 23
2.
Write Control number from B3
3.
SUBTRACT C2
from C1
.
These are the driver
pins.
Record Driver Pins in D Below
D
Less
