Tool Preparation Multimeter Hammer drill（Bit Φ10) Torque screwdriver(Crosshead M5) Socket wrench set(Hexagon) DC Voltage range ≥1100 V DC Quick Installation Guide OT terminals press clamp Multifunction terminal crimping Diagonal pliers Utility knife...
More
Tool Preparation Multimeter Hammer drill（Bit Φ10) Torque screwdriver(Crosshead M5) Socket wrench set(Hexagon) DC Voltage range ≥1100 V DC Quick Installation Guide OT terminals press clamp Multifunction terminal crimping Diagonal pliers Utility knife (0.5~6mm²) tool (RJ45) X3-Hybrid 5.0KW-15.0KW Diagonal pliers Hexagon keys Rubber hammer Tape ruler Crimping Tool Marker Euro terminal crimping tool Spirit level Packing List Mounting Steps a ) Use a marker to mark drilling holes of the b) Drill holes at marked spots with depth of 65mm. c) Insert expansion bolt into the hole, use bracket on the wall. rubber hammer to knock the expansion m 6 5 .0 0 m screw bolt into the wall. PV pin angle ☆ Expansion bolts, (positive*3☆, negative*3 ) X3-Hybrid G4 Waterproof cover*1☆ PV terminal Tapping screws, Bracket 10AWG Euopean ☆ series inverter terminals*12☆ (positive*3☆, negative*3 ) Φ8 Hammer drill b) Hammer a) (Torque :2.5±0.2N·m) c) d ) The bracket is aligned with the screw uses e) Hang the buckle o
Less
